Professional Electric Hair Clippers for Fast, Quiet, and Precise Home Grooming

LT-761 Professional Electric hair clippers For Home

Choosing the right electric hair clipper is no longer a matter of comparing appearance and motor speed alone. Modern users expect a grooming device to deliver reliable cutting performance, comfortable handling, long operating time, easy maintenance, and a professional finish without requiring salon-level expertise. The LT-761 Professional Electric Hair Clippers For Home is designed around these expectations. It combines a magnetic levitation motor, a high-speed DLC-coated blade head, a large-capacity rechargeable battery, multiple guide combs, and a charging base in one practical grooming system.

The LT-761 is suitable for personal home use, family grooming, mobile barbers, and professional salons that require an efficient secondary or portable clipper. Its design emphasizes stable power output, reduced heat generation, quiet operation, and precise control. Instead of relying on a basic motor and standard blade assembly, the device uses a 9,000 RPM magnetic levitation motor and a cutter head treated with Diamond-Like Carbon coating technology. These features are intended to support fast cutting while reducing pulling, jamming, skin discomfort, and performance decline during extended operation.

Manufactured by Yuyao Laituo Electric Appliance Co., Ltd., the clipper also reflects the strengths of a specialized personal-care appliance producer. The company operates within Yuyao’s extensive mould and electronics manufacturing environment, combining product development, component processing, assembly, testing, and export capabilities. This integrated background is important for buyers seeking OEM or ODM grooming products because it supports more consistent production, practical customization, and closer quality control.

Why Professional-Grade Features Matter in a Home Hair Clipper

Home haircutting has become increasingly common. Parents trim children’s hair, individuals maintain short hairstyles between salon visits, and professionals use compact cordless clippers for outlining, finishing, and travel work. However, not every clipper is capable of maintaining consistent performance in these situations. A low-quality device may slow down when cutting dense hair, become hot after several minutes, produce excessive noise, or pull hair instead of cutting it cleanly.

A professional-grade clipper addresses these problems through a combination of motor design, blade quality, battery capacity, housing construction, and accessory compatibility. The motor must provide enough torque and speed to move the blades through different hair types. The blade must remain sharp and smooth. The battery must support a useful working session rather than forcing the user to recharge after a short period. The body must be durable while remaining comfortable to hold.

The LT-761 approaches these requirements as a complete system. Its magnetic levitation motor is designed to maintain strong and stable output. Its 9,000 RPM operating speed supports fast blade movement for efficient cutting. The DLC-coated blade head is engineered for hardness, wear resistance, corrosion resistance, and a smooth cutting surface. The included eight guide combs provide a broad range of cutting lengths, while the 4,500 mAh 21700 battery allows approximately 240 to 270 minutes of use after a full charge.

These characteristics give the LT-761 an advantage over basic entry-level clippers that often use smaller batteries, slower motors, fewer combs, or ordinary uncoated blades. The result is a device intended not merely for occasional trimming, but for dependable repeated use.

Magnetic Levitation Motor for Stable Cutting Power

The motor is one of the most important components in an electric clipper. It determines how quickly the blades move, how effectively the device handles resistance, and how much noise and vibration the user experiences. The LT-761 uses a magnetic levitation motor with a rated speed of 9,000 RPM. This motor configuration is designed to provide strong and stable power while maintaining smooth operation.

Magnetic levitation motor technology uses magnetic force to support the moving motor structure. By reducing reliance on conventional mechanical contact points, the design can help reduce friction within the motor system. Lower internal friction may contribute to reduced vibration, quieter operation, smoother power delivery, and less mechanical wear. In a hair clipper, these characteristics are valuable because the device is frequently held close to the user’s ears and scalp.

A high rotational speed also helps the cutter head move efficiently through hair. When the blade system maintains rapid movement, it is less likely to stall or hesitate as it encounters thicker sections. This is particularly useful when trimming dense hair, creating clean outlines, or reducing bulk over a large area. Stable speed can also help provide a more even result, as the user does not need to repeatedly pass over the same section.

Many conventional clippers may advertise high speed but provide limited information about how the motor behaves under load. A nominal speed figure alone does not guarantee performance. The value of the LT-761’s motor design is the combination of speed and stability. The magnetic levitation structure is intended to maintain smooth output, while the 7.5W power rating supplies the energy needed for regular home and professional grooming tasks.

The motor is also designed to operate with low noise and slight vibration. These features support a more comfortable grooming experience for both the operator and the person receiving the haircut. Reduced vibration can improve control during edging and detailing, while lower noise may be especially helpful when trimming children’s hair or working in shared living spaces.

Performance Benefits During Continuous Operation

A clipper that performs well for only a few minutes is of limited value in a salon or busy household. Extended operation can expose weaknesses in the motor, battery, heat management, and blade assembly. According to its design specifications, the LT-761 is intended to provide steady power without overheating during continuous operation. Its motor, blade coating, and heat-dissipation characteristics work together to support longer grooming sessions.

The device’s DLC-coated cutter head is described as generating low heat and dissipating heat quickly. This is important because heat can affect comfort, blade performance, lubricant condition, and battery efficiency. A cooler-running cutting system is more suitable for repeated use, although users should still follow normal maintenance practices and allow the device to cool if it becomes unusually warm.

Stable power also makes the clipper easier to use. When a motor slows noticeably, users often press harder against the hair, increasing discomfort and reducing cutting precision. Consistent output allows the operator to guide the clipper with controlled pressure and a steady movement. This is helpful for fades, neckline work, sideburns, beard lines, and general hair reduction.

DLC-Coated Blade Head for Smooth, Durable Cutting

The blade head is the point where the clipper meets the hair and, in many cases, the skin. Its design influences cutting accuracy, comfort, maintenance requirements, and product life. The LT-761 uses a DLC-coated blade head. DLC stands for Diamond-Like Carbon, a coating technology associated with high hardness, wear resistance, corrosion resistance, and a smooth surface.

The supplied product information describes the blade head as using diamond material and generating low heat with fast heat dissipation. In practical terms, the key advantage is the protective DLC coating applied to the cutting surface. The coating is intended to help the blades retain their cutting characteristics during repeated use while resisting surface wear and corrosion.

A smooth blade surface can reduce the likelihood of hair catching between moving components. This is particularly important when cutting coarse, thick, or longer hair. Hair jamming interrupts the cutting process and may require the user to stop, clean the blade, and restart. By helping hair pass through the cutter head more smoothly, the LT-761 is designed to support a more continuous and efficient trimming process.

The blade surface also affects skin comfort. Roughness, damaged edges, or excessive heat may increase the chance of irritation, especially when the clipper is used around the neckline, ears, and other sensitive areas. The DLC coating is intended to maintain a smooth contact surface and support a safer-feeling haircut when the device is used correctly.

Compared with ordinary uncoated cutter heads, a DLC-coated blade can offer a stronger combination of hardness, corrosion resistance, and smoothness. This does not eliminate the need for cleaning and oiling. All precision cutting devices require care, and the LT-761 includes an oil bottle and cleaning brush to help users maintain the blade assembly.

Precision for Multiple Haircutting Tasks

The LT-761 is suitable for more than simple bulk removal. Its motor and cutter head combination can be used for several common grooming tasks, including shortening hair, shaping the sides and back, creating gradual length transitions, trimming around the ears, defining the neckline, and maintaining short styles. With suitable technique and the correct guide comb, it can also support basic fade work and controlled blending.

Precision depends on both the clipper and the operator. The device provides the mechanical foundation: fast blade movement, a sharp coated cutter head, and stable power. The user supplies the technique by selecting the appropriate comb, maintaining the correct angle, and moving the clipper evenly. The combination makes the LT-761 suitable for beginners who want a flexible home tool and experienced users who require a reliable finishing device.

Eight Limit Combs for Flexible Length Control

One of the practical strengths of the LT-761 is its set of eight limit combs. The included sizes are 1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm, 16 mm, and 19 mm. This selection covers very short trimming and longer general haircutting, allowing users to adjust the result without purchasing additional attachments immediately.

Guide Comb	Typical Use	Practical Benefit
1.5 mm	Very short trimming and close detailing	Useful for short sides, edging, and controlled reduction
3 mm	Short cuts and compact side sections	Creates a neat, low-length appearance
4.5 mm	Intermediate short trimming	Helps create a gradual transition between lengths
6 mm	Short-to-medium haircutting	Suitable for regular maintenance and blending
9 mm	Medium short styles	Provides additional coverage and length
12 mm	Medium-length trimming	Useful for reducing bulk while retaining visible length
16 mm	Longer clipper cuts	Supports fuller styles and gradual shortening
19 mm	Long guide-comb cutting	Allows users to maintain more length during trimming

The spacing between comb sizes gives users more control than a clipper supplied with only two or three attachments. For a basic fade, the operator can begin with a longer comb to reduce overall volume, then move gradually toward shorter sizes around the sides and lower neckline. For a uniform haircut, one comb can be used across the head, depending on the desired length.

Guide combs also add safety for less experienced users. They create a controlled gap between the blade and the scalp, reducing the risk of removing more hair than intended. Beginners can start with a longer attachment and move shorter only after checking the result. This makes the LT-761 approachable for home users while retaining the flexibility expected by professionals.

Long-Lasting Battery and Convenient Charging

Cordless operation is one of the most useful features in a modern hair clipper. Without a power cable connected during cutting, the user can move freely around the head and reach awkward areas more easily. Cordless use is also convenient for travel, mobile service, bathroom grooming, and situations where a wall outlet is not positioned close to the mirror.

The LT-761 uses a 21700 lithium battery with a capacity of 4,500 mAh. Its stated discharge time is approximately 240 to 270 minutes, depending on operating conditions. This provides several complete home haircuts on a single charge and supports extended professional use. The generous runtime is an important advantage over compact clippers with smaller battery cells that may require frequent charging.

The clipper can be charged using the included 1.8-meter USB cable and charging base. The long cable provides more flexibility when connecting to a suitable USB power source, while the charging base offers a stable location for storage and charging. Users can place the clipper upright on the base between sessions instead of leaving it loose in a drawer.

The listed charging time is five hours. Because the charging period is longer than the operating period, users should plan to charge the device fully before an extended grooming session. After charging, the long operating time reduces the need for repeated interruptions. For professional users, establishing a regular charging routine at the end of the working day can help ensure that the clipper is ready for the next session.

Advantages of a 21700 Battery Format

The 21700 battery format is larger than the cylindrical cells commonly found in smaller cordless grooming devices. Its larger physical size can support higher energy capacity, which is consistent with the LT-761’s 4,500 mAh specification. For a clipper, this means the product can maintain cordless convenience without sacrificing working endurance.

Battery capacity is not the only factor that determines runtime. Motor efficiency, blade resistance, operating technique, battery condition, and ambient temperature also affect actual use. The stated 240 to 270 minutes should therefore be understood as an expected range rather than a guarantee for every operating situation. Even with these variables, the capacity provides a substantial reserve for ordinary household use.

Ergonomic Housing and Durable Materials

The main body of the LT-761 is made from ABS and aluminum alloy. These materials provide a practical balance between durability, weight, appearance, and manufacturability. ABS is widely used in personal-care appliances because it can form a protective outer housing with good impact resistance and a comfortable surface. Aluminum alloy can contribute structural strength and a more solid feel in selected parts of the device.

A well-designed body is essential for control. Haircutting often requires the clipper to be held at different angles, including vertically around the ears and horizontally across the back of the head. The device should feel stable without becoming tiring during a long session. The LT-761’s combination of a compact electric appliance structure and balanced materials is intended to support this type of handling.

The clipper is available in red, yellow, and green. Color selection can be useful for consumer product lines, salon staff identification, retail differentiation, or OEM customization programs. Multiple color choices also allow buyers to match the device with a broader personal-care product collection.

The product is supplied in a gift box. This packaging format is suitable for retail presentation, gifting, and organized storage. For distributors and brand owners, the gift-box format can provide a foundation for further packaging development, including customized printing, language adaptation, accessory organization, and private-label presentation.

Maintenance System for Long-Term Performance

Even the most advanced clipper requires regular maintenance. Hair, skin particles, styling products, and oil residue can accumulate around the cutter head. If this debris is not removed, it may increase friction, reduce cutting efficiency, and contribute to premature wear. The LT-761 includes both an oil bottle and a cleaning brush to support routine care.

After use, the operator should switch off the clipper, remove the guide comb, and brush loose hair from the blade area. The cutter head should be inspected for trapped particles. A small amount of suitable clipper oil can then be applied according to the manufacturer’s recommended maintenance method. Excess oil should be wiped away so that it does not attract additional debris.

The guide combs should also be cleaned regularly. If several people use the same clipper, hygiene becomes especially important. Attachments should be cleaned and dried after use, and the blade area should not be stored while wet. Proper maintenance helps preserve smooth blade movement and supports the comfort benefits of the DLC-coated cutter head.

Users should avoid immersing the main body in water unless the product is specifically rated for full washing. USB charging equipment should be kept dry. The clipper should also be stored in a clean, ventilated place and protected from excessive heat, moisture, and direct sunlight. These simple practices can help extend battery life and preserve the housing and blade system.

Comparison with Conventional Electric Hair Clippers

The LT-761 stands out because its advantages are distributed across the entire product rather than concentrated in one specification. A conventional clipper may provide cordless operation but use a small battery. Another may offer multiple combs but rely on a basic motor. A third may have a sharp blade but generate excessive heat during continuous operation. The LT-761 combines high-speed magnetic levitation power, DLC-coated cutting components, long cordless runtime, and a broad accessory set.

Evaluation Area	LT-761 Design	Common Basic Clipper Limitation	User Advantage
Motor	Magnetic levitation motor, 9,000 RPM	Less stable output or lower operating speed	Faster and more consistent cutting
Blade	DLC-coated precision cutter head	Standard uncoated blade may wear more quickly	Improved hardness, smoothness, and wear resistance
Heat management	Low heat generation and fast heat dissipation design	Blade and housing may become uncomfortable during extended use	Better suitability for longer sessions
Battery	21700/4500 mAh battery	Shorter runtime from smaller battery capacity	Approximately 240–270 minutes of use
Length control	Eight guide combs from 1.5 mm to 19 mm	Limited number of attachments	More haircutting and blending options
Charging	USB cable and charging base	Cable-only or less organized charging	Flexible charging and convenient storage
Maintenance	Oil bottle and cleaning brush included	Accessories may need to be purchased separately	Immediate support for routine care

This comparison does not mean that every competing clipper lacks these features. Instead, it shows how the LT-761 is positioned within the market. Its combination of specifications makes it suitable for buyers who want a more capable device than a basic entry-level model but still need a convenient cordless product for home or salon use.

Applications in the Home and Professional Salon

At home, the LT-761 can be used by individuals and families for regular haircut maintenance. The eight guide combs allow different household members to select their preferred length. Parents can use longer attachments for cautious trimming and shorter attachments for neat side sections. Users who already have haircutting experience can combine several sizes to create more defined transitions.

The clipper is also suitable for beard and neckline detailing when the user selects an appropriate attachment and works carefully. However, it is primarily designed as an electric hair clipper, so users should consider the specific requirements of facial hair and skin sensitivity before using it for other grooming applications.

In a salon, the LT-761 can serve as a primary clipper for selected services or as a secondary device for outlining, blending, and finishing. Its long cordless runtime reduces the need to move between stations. The charging base helps organize equipment, while the motor and DLC-coated blade head are suited to repeated operation when properly cleaned and lubricated.

For mobile barbers and independent stylists, portability is another benefit. A cordless device with a long working time can be useful for home visits, event styling, hotel services, and travel. The included gift box can also help keep the cable, guide combs, cleaning tools, and clipper together during transport.

Manufacturing Strengths Behind the Product

The quality of a grooming appliance depends not only on its visible specifications but also on the manufacturing system used to produce it. Yuyao Laituo Electric Appliance Co., Ltd. is based in Yuyao, an area recognized for mould production and industrial manufacturing. Access to a complete local electronic manufacturing chain can support efficient sourcing, faster development cycles, and close coordination between product design and production.

The company integrates research and development, production, and sales. This structure allows product concepts to be evaluated against manufacturing realities from an early stage. Housing design, battery placement, motor installation, blade alignment, charging interfaces, and packaging can be considered together rather than developed in isolation.

The company covers approximately 1,000 square meters and has nearly 100 employees. Its facilities include automated production lines and precision testing equipment. Automation can improve repeatability in assembly processes, while testing equipment helps verify important product characteristics. For a clipper, these may include motor operation, charging behavior, battery performance, blade movement, noise, vibration, electrical safety, and appearance quality.

Full-process production capabilities, from design and development to finished product assembly, are particularly relevant for OEM and ODM customers. A buyer may need a private-label version, a customized color, modified packaging, revised accessories, or changes to product identification. An integrated manufacturer is generally better positioned to coordinate these requirements than a trading business that outsources every stage to unrelated suppliers.

Automated Production and Process Consistency

Automated production lines can help maintain consistent assembly procedures. In an electric clipper, small differences in motor seating, blade alignment, screw fastening, or housing closure may affect operating noise and cutting feel. A controlled production process helps reduce variation between units and supports a more predictable customer experience.

Automation does not replace human quality management. Skilled workers remain important for inspection, component handling, final assembly, packaging, and abnormal-condition review. The strongest manufacturing approach combines automated repeatable operations with human supervision and product testing. This balance is especially useful for personal-care appliances, where performance and user comfort are closely connected.

Precision testing equipment also supports quality assurance. A professional manufacturer can test samples or production units against defined standards, verify that electrical components function correctly, and identify defects before products reach customers. Such procedures help protect both end users and OEM brand owners from avoidable quality problems.

Certification and Export Experience

The company states that its products have passed CE and RoHS certifications. CE marking is associated with conformity requirements for applicable products sold in the European Economic Area, while RoHS addresses restrictions on certain hazardous substances in electrical and electronic equipment. Certification requirements vary by market and product configuration, so importers should confirm the documentation applicable to their specific order.

Experience with international markets can also be valuable. The company has independent export rights and reports sales to more than 30 countries and regions across Europe, America, South America, and other markets. International experience may help with export documentation, packaging requirements, product labeling, communication, and coordination with overseas buyers.

For distributors and private-label customers, a manufacturer’s export background can reduce some of the practical difficulties associated with cross-border procurement. It does not eliminate the buyer’s responsibility to verify local compliance, but it provides a stronger foundation for international cooperation.

OEM and ODM Potential for Personal-Care Brands

The LT-761 can serve as a ready product for wholesale distribution, but its manufacturing background also makes it relevant to OEM and ODM programs. Personal-care brands may use the existing platform with customized colors, logos, packaging, manuals, accessory combinations, or market-specific product positioning.

OEM customers who already have a defined product concept can benefit from a manufacturing partner capable of handling production and assembly. ODM customers who need support developing a product may benefit from the manufacturer’s experience with motorized grooming appliances, moulds, blade systems, batteries, and charging structures.

Customization should be planned carefully. Changing the color or package design is usually less complex than changing the motor, battery, blade geometry, or charging system. Technical modifications may require additional testing and certification review. A professional supplier should clarify minimum order quantities, sample procedures, lead times, packaging specifications, quality standards, and documentation before mass production begins.

The LT-761’s existing configuration offers a useful starting point because it already includes a complete set of core components: magnetic levitation motor, DLC-coated blade head, rechargeable battery, USB cable, charging base, eight guide combs, oil bottle, brush, and gift-box packaging. This can shorten the development path for brands that want to launch a high-specification cordless clipper without designing every component from the beginning.

How to Get the Best Results from the LT-761

Before cutting, the hair should be clean, dry, and free of excessive styling products. Wet or heavily coated hair may behave differently and can increase resistance around the blade. The guide comb should be attached securely, and the clipper should be tested briefly before it is applied to the head.

When reducing length, users should begin with a longer guide comb than the final target length. This approach provides a margin for correction. The clipper should be moved slowly and evenly against the direction of hair growth when reducing length, while blending movements may require a flicking motion away from the scalp. Pressure should remain moderate; pressing too firmly does not necessarily improve cutting and may increase discomfort.

For side sections and fades, it is useful to work in stages. A longer comb can remove bulk from the upper area, followed by progressively shorter combs lower down. The operator should check both sides frequently to maintain balance. Around the ears and neckline, careful positioning is essential. The blade should be kept controlled, and the skin should not be stretched excessively.

After cutting, the clipper should be switched off and cleaned. Hair should be removed from the blade and combs, and a small amount of oil should be applied as needed. The device should then be returned to the charging base or stored safely.

Safety and Responsible Use

The LT-761 is designed for hair clipping, and users should operate it according to the supplied instructions. The blade should not be forced through severely tangled hair. Children should use the device only under appropriate adult supervision, especially when the clipper is being charged or cleaned.

Users should inspect the cable, charging base, housing, and blade before operation. If any component is damaged, the device should not be used until it has been checked or repaired by an appropriate service provider. The main body and charging components should be protected from water unless the product documentation specifically confirms washability.

Battery products should be kept away from extreme heat and should not be opened or modified by the user. The clipper should be charged using a compatible power source and stored with attention to battery safety. Following these precautions helps preserve both product performance and user safety.

Frequently Asked Questions

What type of motor does the LT-761 use?

The LT-761 uses a magnetic levitation motor with a rated speed of 9,000 RPM. It is designed to provide strong and stable power output with low noise, slight vibration, and improved suitability for continuous operation.

How long can the clipper operate after charging?

The stated usage time is approximately 240 to 270 minutes. Actual runtime may vary according to hair type, operating technique, motor load, battery condition, and environmental factors.

How long does a full charge take?

The listed charging time is five hours. The clipper is charged through the included USB cable and charging base.

What battery is used in the device?

The LT-761 uses a 21700 lithium battery rated at 4,500 mAh. This large-capacity battery supports extended cordless operation.

What guide comb sizes are included?

Eight guide combs are included: 1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm, 16 mm, and 19 mm.

What is the advantage of the DLC-coated blade?

DLC, or Diamond-Like Carbon, coating is intended to provide high hardness, wear resistance, corrosion resistance, and a smooth cutting surface. These characteristics can help reduce hair jamming, support efficient cutting, and improve comfort when the clipper is maintained correctly.

Is the LT-761 suitable for professional salons?

Yes. Its 9,000 RPM motor, long cordless runtime, precision cutter head, broad range of guide combs, and charging base make it suitable for salon use, mobile services, finishing work, and household grooming.

Is the clipper suitable for beginners?

Yes. The multiple guide combs allow beginners to start with a longer length and gradually move shorter. Users should still learn basic haircutting technique and operate the clipper carefully around the ears and neckline.

What accessories are included?

The package includes an oil bottle, cleaning brush, 1.8-meter USB cable, charging base, and eight limit combs. The product is supplied in a gift box.

What materials are used for the main body?

The main body uses ABS and aluminum alloy. This combination is intended to provide a practical balance of durability, structural support, and manageable weight.

What colors are available?

The listed device colors are red, yellow, and green. Buyers should confirm available colors, quantities, and customization options when placing an order.

Can the product be customized for an OEM or ODM project?

The manufacturer provides OEM and ODM grooming-device solutions. Potential customization may include branding, colors, packaging, accessories, and selected product specifications, subject to technical review, order requirements, and compliance evaluation.

How should the blade be maintained?

Remove loose hair with the included brush after use and apply clipper oil as needed. Keep the blade clean and dry, and avoid immersing the main body in water unless the official product instructions confirm that it is washable.

Conclusion

The LT-761 Professional Electric Hair Clippers For Home is designed for users who want more than basic trimming performance. Its magnetic levitation motor delivers a combination of high speed and stable output, while the DLC-coated blade head is engineered for sharp, smooth, and durable cutting. The 4,500 mAh 21700 battery supports approximately 240 to 270 minutes of cordless use, and the USB cable and charging base make charging and storage convenient.

The eight included guide combs extend the product’s versatility from very short trimming to longer clipper cuts. ABS and aluminum alloy construction provides a practical housing platform, while the included oil bottle and brush support routine maintenance. Together, these features make the clipper suitable for home users, families, mobile barbers, professional salons, retailers, and private-label personal-care brands.

Its broader strength comes from the manufacturing capabilities behind the product. Yuyao Laituo Electric Appliance Co., Ltd. combines research and development, automated production, precision testing, assembly, certification experience, and international export capability. This integrated structure supports not only the current LT-761 configuration but also potential OEM and ODM cooperation for grooming-device brands seeking a reliable manufacturing partner.

For buyers comparing electric hair clippers, the LT-761 offers a well-balanced combination of motor performance, blade technology, battery endurance, length flexibility, maintenance support, and manufacturing credibility. It is positioned as a professional-style cordless clipper that brings efficient, controlled, and comfortable grooming closer to everyday home use.

References

1. Product specification sheet for the LT-761 Professional Electric Hair Clippers For Home.

2. Technical information supplied for the 9,000 RPM magnetic levitation motor and 7.5W power system.

3. Technical information supplied for the DLC-coated precision cutter head and heat-dissipation design.

4. Battery and charging specifications supplied for the 21700/4500 mAh rechargeable battery, USB cable, and charging base.

5. General engineering references concerning Diamond-Like Carbon coatings, wear resistance, corrosion resistance, and low-friction surfaces.

6. General personal-care appliance maintenance guidance concerning clipper cleaning, lubrication, battery care, and safe operation.

7. Manufacturer information concerning research and development, automated production, precision testing, CE and RoHS certification, and OEM/ODM capabilities.

Product: LT-761 Professional Electric hair clippers For Home